Description 100MHz Oscilloscope Probe X1/X10 The FNIRSI P6100 Oscilloscope probe has a bandwidth of 100MHz and a switch to select between X1 or X10 voltage attenuation so you can scale your measurement either by one or by a factor of 10. It will work with any oscilloscope, both analogue and digital. This probe can measure intermediate and low-frequency signals. It has a contractive-type acuminate hook and a 12cm earth wire with an alligator clip. It sells as a single oscilloscope probe. To use the P6100 Oscilloscope Probe with the FNIRSI DSO-TC3 Handheld Oscilloscope you will need a BNC-MCX Adapter. Specifications: Attenuation: x1x10 Input resistance: 1MΩ: 10MΩ - 2% Input Capacitance: x1: 60pF~120pF; x10: 13.5pF~16.5pF System Bandwidth: x1: DC-10MHz; x10: DC-100MHz Rise Time: x1: 35ns; x10: 3.5ns Max Input Voltage: x1: 150V RMS CAT II; x10: 300V RMS CAT II Compensation Range: 15~45pF Safety Standards: IEC61010-031 Cable Length: 110cm Included in the P6100 Oscilloscope Probe Set: Oscilloscope Probe x 1, Retractable Hook x 1, Adjustment Tool x 1, Locating Sleeve x 2, Color-coded Rings x 8, Ground Lead x 1, Ground Spring x 1.
