Description 3-in-1 Handheld Multitester Oscilloscope The new FNIRSI DSO-TC3 is a handheld Multitester Oscilloscope with 500kHz bandwidth and 10Ms/s sampling rate. It features a digital Oscilloscope, Function Generator, Component Tester and LCR Meter. It is very compact and lightweight with low power consumption. It has a USB Type-C charging interface and a lithium battery. This oscilloscope has a high-resolution colour screen and minimalist keyboard design. A very handy multitester oscilloscope, function generator and component tester for the beginner, for fieldwork, and as a handy tester on your desk. Purchase the optional x1x10 100MHz Oscilloscope Probe to enable x10 voltage scaling in your measurements. You will also need a BNC-MCX Adapter to use a standard oscilloscope probe with the DSO-TC3. DSO-TC3 Review Video Quick Introduction Video & How to Use the Component Tester Demo video Oscilloscope Specifications: Bandwidth: 500kHz, 1CH Sample Rate: 10MSa/s Trigger Modes: Auto, Single, Normal Trigger Type: rising edge, falling edge AUTO One-key function – grab and save a waveform instantly Test Voltage range: 400V Vertical Sensitivity: 10mV ~ 10V Horizontal Time Base range: 1us ~ 10s Function Generator Specifications: 6 Waveform types: sine, square, pulse, triangle, ramp, DC Output Frequency: 1 ~ 100kHz Output Voltage: 0~3.3V adjustable Output Duty ratio adjustable 0~100% Component Tester Specifications: Automatically identifies and measures various transistors, including NPN and PNP triode, N-channel and P-channel MOSFETs, JFET, diodes, double diodes, thyristors, capacitors etc., passive components Automatic detection of pin definitions IMPORTANT: When testing capacitors with the Component Tester, you need to discharge the capacitor before inserting it into the test slots. If not discharged, you will damage the DSO-TC3 and this user error will void the warranty. Discharge capacitors by touching the 2 legs to each other before inserting them into the Component Tester slots. The warranty does not cover surge damage due to user error. Please carefully read the user manual and watch our Instruction videos. General Specifications: 1-Year Limited Warranty (does not cover damage due to user error) Battery Capacity: 1500mAh HQ Polymer Lithium (4 hours use-time) Display: 2.4″ TFT color display Dimensions: 103 x 79 x 31mm (L x W x H) Weight: 210g The FNIRSI-DSO-TC3 Multitester Package Includes: FNIRSI-DSO-TC3 Multitester Oscilloscope, 1 x BNC to Alligator Test Probe, 3 X Test Hook Cables, USB Type-C Charger Cable, Printed User Manual. Also see the Hantek-2D42 Multitester
