Description 3-in-1 Handheld Scopemeter: Oscilloscope, Signal Generator & Multimeter The new FNIRSI 2C53T is a 50MHz 250MS/s handheld dual-channel 3-in-1 Scopemeter (Oscilloscope, Signal Generator and Multimeter) in one handy multitester format. It features overload protection and an integrated high-voltage protection module supports peak voltage measurements up to ±400V. It also supports waveform screenshot saving and export for secondary analysis. It is lightweight and compact with low power consumption. It has a USB-C charging interface with a rechargeable lithium battery offering a 6h standby time. This multitester has a high-resolution colour-LCD screen and minimalist keyboard design. The ideal electronic tester for the beginner, fieldwork and as a handy tester on your desk. Technical Specifications: Oscilloscope: Bandwidth: 50MHz, 2CH Sample Rate: 250MSa/s Memory Depth: 1Kpts Impedance: 1MΩ Time Base: 10ns ~ 20s Vertical Scale: 10mV/div ~ 10V/div Maximum Measured Voltage: - 400V Trigger Mode: AUTO/Normal/Single Trigger Type: Rising edge, Falling edge Display Mode: Y-T/Rolling/X-Y Math Function: 8 Basic Operations FFT Waveform Screenshot Save: Supported Export Waveform Image: Supported Cursor Management: Supported Infinite Afterglow: Supported Signal Generator: Bandwidth: 1Hz ~ 50KHz Output Frequency: 1Hz ~ 50KHz Output Amplitude: 0.1 ~ 3V Waveforms: sine, rectangular, sawtooth, half wave, full wave, positive step wave, reverse step wave, exponential rise, exponential fall, DC, multi-audio, Sinker pulse, Lorentz wave Multimeter: True RMS 10000 Counts, Voltage, Current, Resistance, Capacitance, Diode, On-Off & Temperature Input Impedance: 10MΩ DC Voltage: 0V ~ 1000V AC Voltage: 0V ~ 750V AC/DC Current: 0A ~ 10A Resistance: 0Ω ~ 100MΩ Capacitance: 0nF ~ 100mF Temperature: -55°C ~ 1300°C Duty Cycle: 0 ~ 100 % Diode, Continuity, Non-Contact Voltage detection 4.5 Digits with 19999 counts Product features: Oscilloscope Signal Generator Multimeter. Build-in high voltage protection. Type C charging cable. One-click SAVE function. Upload saved images to your PC via the USB-C charging cable. Small volume, one-hand operation: The 45-degree suspension bracket design provides you with a workstation anywhere anytime. ABS plastic Housing with a Silicone sleeve for shock protection. Colour LCD screen: displays waveforms clear and undistorted when magnified. Minimalist keyboard design simplifies operation. Display: 2.8 inches (320 x 240mm) colour LCD. Battery: 3000mAh rechargeable lithium offering 6 hours of standby time. Dimensions: 167 x 89 x 35mm (L x W x H). Weight: 300g. The FNIRSI 2C53T 3-in-1 Scopemeter Package Includes: FNIRSI 2C53T Multitester, 2 x (x1x10) Oscilloscope Test Probes, 2 x Multimeter Test Leads, 1 x Alligator Clamp Cable, USB-C Charging cable to connect the oscilloscope to your PC, Storage Bag, User Manual. Also see the FNIRSI 2C23T Multitester
